文章摘要
Effect of ZDMA on Adhesion Between EPDM Compound and Aramid Cord
Received:March 19, 2024  Revised:March 20, 2024
DOI：10.12136/j.issn.1000-890X.2026.04.0277
Key Words: ZDMA；EPDM；aramid cord；adhesion；V-belt
Author NameAffiliationE-mail
MA Chunlin* Key Laboratory of Rubber and Plastic Materials and Engineering, Qingdao University of Science and Technology, Ministry of Education 1250641138@qq.com 
ZHAO Yiran Key Laboratory of Rubber and Plastic Materials and Engineering, Qingdao University of Science and Technology, Ministry of Education  
LI Peijun Key Laboratory of Rubber and Plastic Materials and Engineering, Qingdao University of Science and Technology, Ministry of Education  
Hits: 234
Download times: 37
Abstract:
      The effect of zinc dimethacrylate（ZDMA） on the adhesion between ethylene propylene diene monomer rubber（EPDM） compound and aramid cord used in V-belt was investigated.The results showed that the addition of 5 phr ZDMA in peroxide-vulcanized EPDM compound could reduce the Mooney viscosity of the compound，improve processability，and significantly enhance the crosslinking density，Shore A hardness，modulus at 100% elongation，tensile strength and tear strength，while maintaining a higher elongation at break.Furthermore，ZDMA remarkably enhanced the adhesive strength between EPDM compound and aramid cord，the adhesive strength between EPDM compound with 7.5 phr ZDMA and aramid cord reached up to 39.0 kN·m-1，which was 150% higher than that of EPDM compound without ZDMA.
View Full Text   View/Add Comment  Download reader
Close