| Study on Friction and Sealing Performance of Circle-Ellipse Vertical Composite Microporous Textured End-Face Sealing Device of Mixer |
| Received:April 25, 2023 Revised:April 25, 2023 |
| DOI:10.12136/j.issn.1000-890X.2026.03.0211 |
| Key Words: composite microporous texture;internal mixer;end-face sealing equipment;roughness effect;sealing performance;friction performance |
| Author Name | Affiliation | E-mail | | WANG Zesheng | College of Electromechanical Engineering, Qingdao University of Science and Technology | 1091625258@qq.com | | ZHANG Chao | College of Electromechanical Engineering, Qingdao University of Science and Technology | | | SONG Yumeng | College of Electromechanical Engineering, Qingdao University of Science and Technology | | | XU Yan | College of Electromechanical Engineering, Qingdao University of Science and Technology | | | YANG Fuqin* | College of Electromechanical Engineering, Qingdao University of Science and Technology | yangfuqin@qust.edu.cn | | ZHANG Zerong | 青岛科技大学 | |
|
| Hits: 272 |
| Download times: 87 |
| Abstract: |
| The circle-ellipse vertical composite microporous texture (hereinafter referred to as composite texture)on the sealing end-face of the internal mixer was set up,and a composite textured end-face sealing model was established.Based on fluid dynamic pressure lubrication theory,the friction performance and sealing performance of the composite textured end-face sealing device of the internal mixer were investigated considering the roughness effect.The results indicated that,under different comprehensive roughness parameters,when the texture depth(hp) of the composite textured end-face was 4~6 μm,the end-face sealing device exhibited good friction performance but poor sealing performance.Under different roughness texture direction parameters,when the hp of the composite textured end-face was 5~7 μm,the end-face sealing device showed too good friction performance but poor sealing performance.With the increase of the texture area ratio of the composite textured end-face,the friction performance of the end-face sealing device was improved,while its sealing performance was reduced. |
|
View Full Text
View/Add Comment Download reader |
| Close |