Specification Selection and Applicability Analysis of Oil Seal Spring |
Received:February 12, 2020 Revised:February 12, 2020 |
DOI:10.12136/j.issn.1000-890X.2020.08.0611 |
Key Words: oil seal spring;specification;spring radial force;shaft diameter |
Author Name | Affiliation | E-mail | LI Xiuzhen | CRRC Zhuzhou Electric Locomotive Research Institute Co.,Ltd | 416839331@qq.com | YANG Jianfei | CRRC Zhuzhou Electric Locomotive Research Institute Co.,Ltd | | HUANG Le* | Guangzhou Mechanical Engineering Research Institute Co.,Ltd | huangle27@163.com | WU Jun | Guangzhou Mechanical Engineering Research Institute Co.,Ltd | | ZHAO Minmin | Guangzhou Mechanical Engineering Research Institute Co.,Ltd | |
|
Hits: 898 |
Download times: 260 |
Abstract: |
A calculation method of the radial force of oil seal spring(P) was introduced,and the verification test was carried out. 8 kinds of common oil seal springs(0. 30×1. 6,0. 36×2. 0,0. 45×2. 5,0. 50×3. 0,0. 60×3. 5,0. 80×4. 0,1. 00×5. 0 and 1. 20×7. 0 ) were selected,and P values were calculated under different shaft diameters(50~1 600 mm) and different elongation(<10%). According to the recommended P values,the applicable ranges of the shaft diameter of suitable specifications of oil seal spring were obtained,and a reference for the selection and design of the oil seal spring was provided. |
View Full Text
View/Add Comment Download reader |
Close |