文章摘要
三骨架减震衬套粘接性能的改进
Improvement on Bonding Property of Three Frame Shock Absorption Bushing
投稿时间：2021-11-02  修订日期：2021-11-02
DOI：10.12136/j.issn.1000-890X.2023.01.0051
中文关键词: 三骨架  减震衬套  粘接性能  粘合剂  硫化工艺  胶料配方
英文关键词: three frame  shock absorbing bushing  bonding performance  adhesives  vulcanization process  compound formula
基金项目:
作者单位E-mail
何方科* 建新赵氏科技有限公司 hefangke@126.com 
胡余优 建新赵氏科技有限公司  
丁斌煊 建新赵氏科技有限公司  
李　剑 建新赵氏科技有限公司  
摘要点击次数: 774
全文下载次数: 450
中文摘要:
      对三骨架减震衬套粘接性能进行改进，从粘合剂种类、硫化工艺和胶料配方设计3方面进行优化。结果表明：选用底涂粘合剂TH-P6、面涂粘合剂TH-OSN-2，采用炭黑N330胶料配方，确定最佳硫化工艺为注胶压力　21 MPa、硫化温度　155 ℃、硫化时间　500 s，制得的三骨架减震衬套具有良好的粘接性能。
英文摘要:
      The bonding property of three frame shock absorbing bushing was improved from three aspects：adhesive type，vulcanization process and compound formula design. The results showed that when primer adhesive TH-P6 and surface coating adhesive TH-OSN-2 were chosen，the carbon black N330 compound formula was used，and the optimum vulcanization process was determined as follows：the injection pressure was 21 MPa，the vulcanization temperature was 155 ℃，and the vulcanization time was 500 s，the three frame shock absorbing bushing had good bonding property.
Author NameAffiliationE-mail
HE Fangke Jianxin Zhao’s Group Corp. hefangke@126.com 
HU Yuyou Jianxin Zhao’s Group Corp.  
DING Binxuan Jianxin Zhao’s Group Corp.  
LI Jian Jianxin Zhao’s Group Corp.  
查看全文   查看/发表评论  下载PDF阅读器
关闭