| 多极磁性橡胶编码器的空间磁场分布仿真分析 |
| Simulation Analysis on spatial Magnetic Field Distribution of Multipole Magnetic Rubber Encoder |
| 投稿时间：2022-08-30 修订日期：2022-08-30 |
| DOI：10.12136/j.issn.1000-890X.2024.03.0178 |
| 中文关键词: 多极磁性橡胶编码器 空间磁场分布 磁感应强度 磁性橡胶 仿真分析 |
| 英文关键词: multipole magnetic rubber encoder spatial magnetic field distribution magnetic induction intensity magnetic rubber simulation analysis |
| 基金项目: |
|
| 摘要点击次数: 225 |
| 全文下载次数: 394 |
| 中文摘要: |
| 基于空间磁场理论对多极磁性橡胶编码器的空间磁场分布开展仿真分析与试验研究，获取磁感应强度在气隙高度方向和径向方向的变化规律，证明了仿真分析的准确性。对磁极对数、磁性橡胶层厚度和宽度对多极磁性橡胶编码器的磁感应强度影响规律的仿真结果可为多极磁性橡胶编码器的设计提供指导。 |
| 英文摘要: |
| Simulation analysis and experimental research on the spatial magnetic field distribution of the multipole magnetic rubber encoder were carried out based on the spatial magnetic field distribution theory.The variation rule of magnetic induction intensity in the air gap height direction and radial direction was obtained，which proved the accuracy of the simulation analysis.The simulation results of the influence of the magnetic pole pairs，the thickness and the width of the magnetic rubber layer on the magnetic induction intensity of the multipole magnetic rubber encoder could provide guidance for the design of multipole magnetic rubber encoders. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
