文章摘要
箱型微波腔体的设计及其棱角对电场分布的影响
Design of Box-type Microwave Cavity and Effect of Its Edges and Corners on Distribution of Electric Field
  
DOI：
中文关键词: 微波谐振腔  电场分布  数值模拟  圆角  硫化
英文关键词: microwave cavity,electric field distribution,numerical simulation,round corner,vulcanization
基金项目:山东省科技发展计划项目（2012GSF11604）；山东省自然科学基金资助项目（ZR2013EEL009）
作者单位
李涛 青岛科技大学 机电工程学院 
张伟 青岛科技大学 机电工程学院 
陈海龙 青岛科技大学 机电工程学院 
梁云 青岛科技大学 机电工程学院 
李庆领 青岛科技大学 机电工程学院 
摘要点击次数: 1055
全文下载次数: 521
中文摘要:
      根据传统的理论计算，结合Ansys数值模拟内部电场分布，发现传统的箱型微波谐振腔设计思想不适用于设计大型微波加热装置。在此设计思想的基础上切除8个尖锐棱角并圆角化，模拟结果显示，谐振腔内部电场分布均匀性得到明显改善。比较一系列模拟结果，发现200 mm半径圆角可使电场分布效果达到最佳。
英文摘要:
      In this study，it was found that the traditional design of box type microwave cavity was not suitable for the design of large microwave heating device based on the calculation using traditional theory as well as the simulation results on electrical field distribution using Ansys.In a new design，the 8 sharp corners were changed to round corners.The simulation results on the new design showed that the uniformity of electrical field inside the cavity was significantly improved.When the corner radius was 200 mm，the distribution of the electric field was the best.
Author NameAffiliation
LI Tao Qingdao University of Science and Technology 
ZHANG Wei Qingdao University of Science and Technology 
CHEN Hai-long Qingdao University of Science and Technology 
LIANG Yun Qingdao University of Science and Technology 
LI Qing-ling Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭