| 浇注型聚氨酯弹性体在实心轮胎翻新中的应用 |
| Application of CPUE in solid tire retreading |
| |
| DOI： |
| 中文关键词: 实心轮胎 浇注型聚氨酯弹性体 翻新 |
| 英文关键词: solid tire casting polyurethane elastomer retreading |
| 基金项目: |
|
| 摘要点击次数: 825 |
| 全文下载次数: 0 |
| 中文摘要: |
| 试验研究浇注型聚氨酯弹性体(CPUE)在实心轮胎翻新中的应用。结果表明，采用预聚体法，选用二元醇CMA-24、甲基二异氰酸酯TDI和扩链剂MOCA为原料(预聚体中异氰酸酯基质量分数为0.036)，在扩链因数为0.88、一段硫化条件为110 ℃×1 h、二段硫化条件为室温×7 d的工艺下合成的CPUE胎面胶综合物理性能优良；与全橡胶实心轮胎相比，CPUE胎面翻新实心轮胎的静负荷性能较好，耐磨性能大大提高。 |
| 英文摘要: |
| The application of casting polyurethane elastomer（CPUE） in solid tire retreading was experimentally investigated.The results showed that CPUE tread possessed good comprehensive physica properties，which was synthesized by prepolymer method，when diol CMA-24，toluenediisocyanate TDI and chain extender MOCA were chosen as raw materials(the mass fraction of —NCO was 0.036 in the prepolymer)，the extension coefficient was 0.88，and the first stage and second stage vulcanization conditions were 110 ℃×1 h and room temperature×7 d respectively.The CPUE tread retreaded solid tire possessed higher static loading capacity，and significantly improved wear resistance，as compared with all rubber solid tire. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
