文章摘要
胶管硫化过程传热分析
Heat Transfer Analysis of Rubber Hose during Vulcanization Process
投稿时间：2023-10-09  修订日期：2023-10-09
DOI：10.12136/j.issn.1000-890X.2025.08.0602
中文关键词: 胶管  硫化  传热  有限元分析
英文关键词: rubber hose  vulcanization  heat transfer  finite element analysis
基金项目:国家自然科学基金资助项目（52206094）
作者单位E-mail
葛孚宇 天津大学机电工程学院 1612373803@qq.com 
李利 青岛科技大学机电工程学院  
王逸远 青岛科技大学机电工程学院  
李晓晨 青岛科技大学机机电工程学院  
韩雯雯* 天津大学机械工程学院 hbhanwenwen@qust.edu.cn 
汪传生 青岛科技大学机电工程学院  
摘要点击次数: 193
全文下载次数: 146
中文摘要:
      采用有限元分析软件对胶管硫化过程传热进行模拟分析。结果表明：随着硫化时间的延长，胶管各部位温度差异逐渐减小；当硫化进行到一定时间后，胶管各部位温度几乎相同，胶管传热达到平衡状态；合理提高胶管初始温度，可有效缩短胶管硫化时间。
英文摘要:
      The simulation and analysis of heat transfer of the rubber hose during vulcanization process by finite element analysis software were carried out.The results showed that as the extension of vulcanization time，the temperature differences of various parts of the rubber hose gradually decreased.After vulcanization for a certain period of time，the temperatures of various parts of the rubber hose were almost the same，and the heat transfer of the rubber hose reached a balanced state.Reasonably increasing the inital temperature of the rubber hose could effectively short vulcanization time of the rubber hose.
Author NameAffiliationE-mail
GE Fuyu School of Mechanical Engineering, Tianjin University 1612373803@qq.com 
LI Li Qingdao University of Science and Technology  
WANG Yiyuan Qingdao University of Science and Technology  
LI Xiaochen Qingdao University of Science and Technology  
HAN Wenwen School of Mechanical Engineering, Tianjin University hbhanwenwen@qust.edu.cn 
WANG Chuansheng Qingdao University of Science and Technology  
查看全文   查看/发表评论  下载PDF阅读器
关闭