文章摘要
便携式橡胶回弹仪的开发及应用
Development and Application of Portable Rubber Rebound Instrument
投稿时间:2022-04-06  修订日期:2022-04-06
DOI:10.12136/j.issn.1000-890X.2023.06.0468
中文关键词: 便携式橡胶回弹仪  回弹值  温度  厚度
英文关键词: portable rubber rebound instrument  rebound value  temperature  thickness
基金项目:国家自然科学基金资助项目(51972185)
作者单位E-mail
杨荣浩 青岛科技大学 高性能聚合物及成型技术教育部工程研究中心青岛科技大学 中德工程学院 yrhqustnr@163.com 
张为健 青岛科技大学 高性能聚合物及成型技术教育部工程研究中心  
刘奕麟 青岛科技大学高性能聚合物及成型技术教育部工程研究中心  
徐联军 青岛联强同创仪器有限公司  
刘 莉 青岛科技大学高性能聚合物及成型技术教育部工程研究中心  
刘光烨 青岛科技大学高性能聚合物及成型技术教育部工程研究中心  
张保岗* 青岛科技大学 高性能聚合物及成型技术教育部工程研究中心 zbg0302@163.com 
摘要点击次数: 873
全文下载次数: 645
中文摘要:
      开发一种便携式橡胶回弹仪并对其测试数据进行分析。结果表明:在室温条件下,便携式橡胶回弹仪测试的橡胶试样回弹值结果准确;在-20~70 ℃范围内,温度对便携式橡胶回弹仪测试的橡胶试样回弹值结果无影响,便携式橡胶回弹仪可以在该温度范围内使用;便携式橡胶回弹仪对于较大厚度(12.36,24.83,37.33 mm)和较小厚度(2.83,6.38 mm)的橡胶试样回弹值测试结果准确,对于最小厚度(1.83 mm)的橡胶试样回弹值测试数据失效。该仪器可用于轮胎、胶辊和胶鞋底等橡胶及弹性体制品的检测和逆向开发。
英文摘要:
      A portable rubber rebound instrument was developed and its test data were analyzed. The results showed that the rebound values of rubber samples tested by the portable rubber rebound instrument were accurate under room temperature conditions. In the range of -20~70 ℃,the test temperature had no effect on the test results,and the portable rubber rebound instrument could be used in this temperature range. The test results of the rebound values of thick rubber samples(thickness of 12. 36,24. 83,37. 33 mm) and medium thick samples(thickness of 2. 83,6. 38 mm) by using the portable rubber rebound instrument were accurate. However,the test results of thin rubber samples with the thickness of 1. 83 mm were not accurate. The instrument could be used for the test and reverse development of various rubber products such as tires, rubber rollers and rubber shoe soles.
Author NameAffiliationE-mail
YANG Ronghao 1. Engineering Research Center of Ministry of Education for High Performance Polymer and Molding TechnologyQingdao University of Science and Technology2. Sino-German College of EngineeringQingdao University of Science and Technology yrhqustnr@163.com 
ZHANG Weijian Engineering Research Center of Ministry of Education for High Performance Polymer and Molding TechnologyQingdao University of Science and Technology  
LIU Yilin Engineering Research Center of Ministry of Education for High Performance Polymer and Molding TechnologyQingdao University of Science and Technology  
XU Lianjun Qingdao Lianqiang Tongchuang Instrument Co.Ltd  
LIU Li Engineering Research Center of Ministry of Education for High Performance Polymer and Molding TechnologyQingdao University of Science and Technology  
LIU Guangye Engineering Research Center of Ministry of Education for High Performance Polymer and Molding TechnologyQingdao University of Science and Technology  
ZHANG Baogang Engineering Research Center of Ministry of Education for High Performance Polymer and Molding TechnologyQingdao University of Science and Technology zbg0302@163.com 
查看全文   查看/发表评论  下载PDF阅读器
关闭