促进剂对小应变下轮胎胶料的拉伸模量稳定性的影响 |
Effect of Accelerator on Tensile Modulus Stability of Tire Compounds Under Small Strain |
投稿时间:2021-05-10 修订日期:2021-05-16 |
DOI:10.12136/j.issn.1000-890X.2023.03.0207 |
中文关键词: 轮胎 拉伸模量 小应变 促进剂 热空气老化 伸张疲劳老化 |
英文关键词: tire tensile modulus small strain accelerator hot air aging tensile fatigue aging |
基金项目:山东省自然科学基金资助项目(ZR2021ME106);中德青年科学院(一期)-中德先进材料与工程研究所研发项目(20-12-3-1-hz-2) |
|
摘要点击次数: 1380 |
全文下载次数: 725 |
中文摘要: |
研究促进剂用量及促进剂并用对小应变下轮胎胶料的拉伸模量稳定性的影响。结果表明:在热空气老化后,随着促进剂CBS用量的增大,胶料在20%应变下的拉伸模量(简称20%拉伸模量)增幅增大,以促进剂DTDM部分替代促进剂CBS能有效地减小胶料的20%拉伸模量减幅;在伸张疲劳老化后,随着促进剂CBS用量的增大,胶料的20%拉伸模量减幅减小,以促进剂DTDM部分替代促进剂CBS,胶料的20%拉伸模量减幅增大。 |
英文摘要: |
The effect of accelerator dosage and accelerator blending on the tensile modulus stability of
tire compounds under small strain was studied. The results showed that,after the hot air aging,the growth
rate of the tensile modulus at 20% strain(20% tensile modulus for short) of the compound increased with the
increase of accelerator CBS dosage,and the decline rate could be effectively reduced by partially replacing
accelerator CBS with accelerator DTDM. However,after the tensile fatigue aging,the decline rate of the 20%
tensile modulus of the compound decreased with the increase of accelerator CBS dosage,which increased by
partially replacing accelerator CBS with accelerator DTDM. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |