| 液体氟弹性体/固体氟橡胶复合材料的制备与性能研究 |
| Preparation and Properties of Liquid Fluoroelastomer/Solid Fluororubber Composites |
| 投稿时间：2020-06-20 修订日期：2020-06-20 |
| DOI：10.12136/j.issn.1000-890X.2022.03.0204 |
| 中文关键词: 液体氟弹性体 氟橡胶 复合材料 加工性能 耐热性能 耐油性能 阻尼性能 |
| 英文关键词: liquid fluoroelastomer fluororubber composite processability heat resistance oil resistance damping performance |
| 基金项目:国家电网有限公司总部科技项目（5211JH190034） |
|
| 摘要点击次数: 1492 |
| 全文下载次数: 960 |
| 中文摘要: |
| 制备液体氟弹性体/固体氟橡胶复合材料，并研究液体氟弹性体/固体氟弹性体用量比（简称液固比）对复合材料性能的影响。结果表明：与固体氟橡胶相比，液体氟弹性体/固体氟橡胶复合材料的加工性能明显提高，物理性能、耐热性能、耐油性能和阻尼性能略有降低，但影响不大；液固比为5/95的复合材料综合性能较好。 |
| 英文摘要: |
| Liquid fluoroelastomer/solid fluororubber composites were prepared，and the effect of liquid fluoroelastomer/solid fluoroelastomer dosage ratio（liquid-solid ratio） on the properties of the composites was studied.The results showed that compared with solid fluororubber，the processability of liquid fluoroelastomer/solid fluororubber composites was significantly improved，and physical properties，heat resistance，oil resistance and damping properties were slightly reduced，but the effect was small.The comprehensive properties of the composites with liquid-solid ratio of 5/95 were better. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
