| 235/45R18轮胎带束层帘线的优化设计 |
| FEA Optimization Design of Belt Cord for 235/45R18 Tire |
| 投稿时间：2019-09-03 修订日期：2019-09-03 |
| DOI：10.12136/j.issn.1000-890X.2020.03.0209 |
| 中文关键词: 带束层 帘线 子午线轮胎 正交试验 优化设计 有限元分析 Mises应力 应变能密度 接地应力 |
| 英文关键词: belt cord radial tire orthogonal test optimization design FEA Mises stress strain energy density contact stress |
| 基金项目:山东省自然科学基金资助项目（ZR2016XJ001） |
|
| 摘要点击次数: 1301 |
| 全文下载次数: 315 |
| 中文摘要: |
| ：通过四因子三水平正交试验，用有限元分析软件Abaqus对235/45R18轮胎带束层帘线截面积、帘线间距、1#带束层帘线角度、2#带束层帘线角度进行优化设计，分析带束层端部的最大Mises应力和最大应变能密度以及胎面最大接地应力。结果表明，带束层帘线截面积为0.16 mm2、帘线间距为1.6 mm、1#带束层帘线角度为58°、2#带束层帘线角度为122°时，轮胎带束层端部的最大Mises应力和最大应变能密度以及胎面最大接地应力最小，轮胎使用寿命更长。 |
| 英文摘要: |
| The cross-sectional area and spacing of the belt cord，and the angles of 1# and 2# belt cords for 235/45R18 tire were optimized by four-factor and three-level orthogonal test via FEA（finite element analysis） soft Abaqus，and the maximum Mises stress，maximum strain energy density of the belt end and maximum contact stress of the tread were analyzed. The results showed，when the cross-sectional area of the belt cord was 0.16 mm2，the spacing of the belt cords was 1.6 mm，the angle of 1# belt cord was 58° and the angle of 2# belt cord was 122°，the maximum Mises stress and maximum strain energy density of the belt end，and the maximum contact stress of the tread were the smallest，and the service life of the tire was extended. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
