| 海上风机钢桩桩塞器橡胶密封圈性能的有限元分析 |
| Finite Element Analysis of Performance of Rubber Sealing Ring for Steel Pile Plug of Offshore Wind Turbine |
| 投稿时间：2019-08-28 修订日期：2019-08-28 |
| DOI：10.12136/j.issn.1000-890X.2020.04.0287 |
| 中文关键词: 海上风机 钢桩 桩塞器 橡胶密封圈 密封性能 有限元分析 正交试验 |
| 英文关键词: offshore wind turbine steel pile pile plug rubber sealing ring sealing performance finite element analysis orthogonal test |
| 基金项目: |
|
| 摘要点击次数: 1190 |
| 全文下载次数: 231 |
| 中文摘要: |
| 基于控制变量法与正交试验法，对海上风机钢桩桩塞器橡胶密封圈性能进行有限元分析，研究了材料硬度、接触面摩擦因数、压缩率和接触面椭圆度，以及截面几何参数对桩塞器橡胶密封圈性能的影响。结果表明：桩塞器橡胶密封圈的材料硬度与压缩率增大均会使其密封性能提升，但同时也会产生负面影响；接触面摩擦因数增大对其密封性能无明显影响；截面几何参数对其工作性能影响从大到小依次为截面宽度、接触面椭圆度、截面长度。 |
| 英文摘要: |
| Based on the control variable method and orthogonal test method，the performance of the rubber sealing ring for the steel pile plug of offshore wind turbine was analyzed by finite element method.The influence of material hardness，friction coefficient of contact surface，compression ratio，contact surface ovality and the geometry parameters of the seal cross-section on the performance of the rubber sealing ring was studied. The results showed that the increase of material hardness and compression ratio of the rubber sealing ring would improve its sealing performance，but at the same time，they would also have a negative impact. The increase of contact surface friction coefficient had no significant effect on the sealing performance of the rubber sealing ring. The effect of the geometry parameters of the seal cross-section on the working performance of the rubber sealing ring decreased in the order of section width，contact surface ovality and section length. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
