文章摘要
串联式连续混炼与传统混炼的胶料性能和能耗研究
Study on Compound Properties and Energy Consumption of Tandem Mixing and Conventional Mixing
投稿时间:2019-07-25  修订日期:2019-07-25
DOI:10.12136/j.issn.1000-890X.2020.05.0384
中文关键词: 串联式连续混炼  传统混炼  密炼机  分散性  能耗
英文关键词: tandem mixing  conventional mixing  internal mixer  dispersibility  energy consumption
基金项目:山东省重点研发计划项目(2019GGX102018);山东省自然科学基金资助项目(ZR2016XJ003)
作者单位E-mail
李 伟 潍柴动力股份有限公司 896388987@qq.com 
汪传生* 青岛科技大学 机电工程学院  
边慧光 青岛科技大学 机电工程学院  
常天浩 青岛科技大学 机电工程学院  
朱 琳 青岛科技大学 机电工程学院  
张鲁琦 青岛科技大学 机电工程学院  
摘要点击次数: 911
全文下载次数: 228
中文摘要:
      对比研究串联式连续混炼与传统混炼的胶料性能和能耗。结果表明:与传统混炼相比,串联式连续混炼制备的混炼胶的填料(炭黑和白炭黑)分散性好,门尼粘度低,硫化胶的300%定伸应力/100%定伸应力、拉伸强度和撕裂强度大,DIN磨耗指数略小;串联式连续混炼制备混炼胶的单位能耗低,生产效率高。与啮合型密炼机传统混炼相比,串联式连续混炼的单位能耗降低14. 8%,生产效率提高16. 3%。
英文摘要:
      The compound properties and energy consumption of tandem mixing and conventional mixing were compared. The results showed that the filler(carbon black and silica) dispersion of the compound by tandem mixing was better than that of the compound by conventional mixing,the Mooney viscosity was lower,the modulus at 300% elongation/the modulus at 100% elongation,tensile strength and tear strength of the vulcanizate were larger,and the DIN abrasion index was slightly smaller. The unit energy consumption was low and the production efficiency was high for the compound preparation by tandem mixing. Compared with the conventional mixing of the mesh type internal mixer,the unit energy consumption was reduced by 14. 8% and the production efficiency was improved by 16. 3% by using the mixing process.
Author NameAffiliationE-mail
LI Wei Weichai Power Co. Ltd 896388987@qq.com 
WANG Chuansheng Qingdao University of Science and Technology  
BIAN Huiguang Qingdao University of Science and Technology  
CHANG Tianhao Qingdao University of Science and Technology  
ZHU Lin Qingdao University of Science and Technology  
ZHANG Luqi Qingdao University of Science and Technology  
查看全文   查看/发表评论  下载PDF阅读器
关闭