文章摘要
机械弹性车轮硫化预热温度研究
Study on Curing Preheating Temperature of Mechanical Elastic Wheel
  
DOI：
中文关键词: 机械弹性车轮  预热温度  温升过程  硫化效果
英文关键词: mechanical elastic wheel  preheating temperature  temperature rise process  vulcanization effect
基金项目:武器装备探索研究项目（NHA13002）
作者单位
杨文涛 南京航空航天大学 能源与动力学院 
赵又群 南京航空航天大学 能源与动力学院 
阮米庆 南京航空航天大学 能源与动力学院 
付宏勋 南京航空航天大学 能源与动力学院 
摘要点击次数: 543
全文下载次数: 0
中文摘要:
      对机械弹性车轮硫化前预热温度进行研究。通过建立车轮硫化模型，使用Ansys软件对机械弹性车轮硫化过程进行热力学仿真，分析对比了不同预热温度对车轮硫化温升过程和硫化程度的影响。结果表明：预热温度对车轮不同部位硫化温升过程的影响存在差异，距离外部热源越远的部位受预热温度的影响越大，车轮过硫率随着预热温度的升高呈上升趋势，车轮的硫化一致性则呈明显的下降趋势。
英文摘要:
      The curing preheating temperature of the mechanical elastic wheel was studied. Based on wheel vulcanization model，the thermal dynamic simulation of mechanical elastic wheel was made by using Ansys software，and the effect of different preheating temperature on the heat process and vulcanization degree of the wheel was compared. The results showed that，the effect of preheating temperature on vulcanization temperature rise process on different parts of wheel was different, and the effect of preheating temperature was greater when it was farther away from the outer heat source. As the preheating temperature increased，the degree of over vulcanization increased，and the vulcanization consistency decreased.
Author NameAffiliation
YANG Wentao Nanjing University of Aeronautics and Astronautics 
ZHAO Youqun Nanjing University of Aeronautics and Astronautics 
RUAN Miqing Nanjing University of Aeronautics and Astronautics 
FU Hongxun Nanjing University of Aeronautics and Astronautics 
查看全文   查看/发表评论  下载PDF阅读器
关闭