| 仿真分析技术在橡胶弹簧硫化时间设计中的应用 |
| Application of Simulation Analysis Technology in Curing Time Design of Rubber Spring |
| 投稿时间：2017-12-07 修订日期：2017-12-07 |
| DOI： |
| 中文关键词: 橡胶弹簧 硫化程度 正硫化时间 仿真分析 |
| 英文关键词: rubber spring curing degree optimum cure time simulation analysis |
| 基金项目: |
|
| 摘要点击次数: 915 |
| 全文下载次数: 378 |
| 中文摘要: |
| 阐述传统计算法和仿真分析法计算橡胶制品正硫化时间的原理，以某橡胶辅助弹簧为研究对象，分别用两种方法计算其正硫化时间，并用溶胀指数和垂向刚度试验进行对比验证。结果表明，仿真分析法能较好地预测胶料硫化程度，可减少产品试模次数，降低研发成本。 |
| 英文摘要: |
| This paper briefly described the calculation method and principle of calculating the optimum crue time of rubber products by traditional experience method and simulation analysis method.Taking a rubber auxiliary spring as the research object，the optimum cure time of the product was calculated by the two methods，and the swelling index and vertical stiffness test method were used to verify simulation results.The results showed that the simulation analysis could predict the curing degree of rubber，and the cycle of test cases and the cost of research and design were reduced. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
