| 氯丁橡胶生胶含量测定的校正曲线分析方法 |
| Determination of Raw Rubber Content of Chloroprene Rubber by Calibration Curve Analysis Method |
| 投稿时间：2017-07-23 修订日期：2017-07-23 |
| DOI： |
| 中文关键词: 氯丁橡胶 热重分析 生胶含量 校正曲线 |
| 英文关键词: chloroprene rubber thermogravimetry raw rubber content calibration curve |
| 基金项目:2016年国家认监委标准制修订项目（计划项目：2016B073） |
|
| 摘要点击次数: 910 |
| 全文下载次数: 425 |
| 中文摘要: |
| 建立了氯丁橡胶（CR）生胶含量测定的校正曲线分析方法。结果表明：热重分析时样品最佳称样量为10 mg，升温程序中650 ℃时的保温时间为20 min，可保证样品完全裂解；通过以CR实际生胶含量为纵坐标、热重分析法测定的生胶含量为横坐标建立的校正曲线，可根据热重分析法测定的生胶含量得到实际生胶含量；测定的准确率在97.95%～104.12%之间。 |
| 英文摘要: |
| The analytical method based on calibration curve was established to detect the raw rubber content of chloroprene rubber（CR）.The results showed that the optimum sample weight for thermogravimetric analysis was 10 mg，and the samples could be fully fragmented when it maintained for 20 min at the maximum oven temperature of 650 ℃.The calibration curve was established by taking the determined actual raw rubber content of CR as y axis and the raw rubber content obtained from thermogravimetry curve as x axis.Based on the calibration curve，the actual raw rubber content of CR could be obtained through the raw rubber content determined by thermogravimetry analysis.The accuracy of determination method for raw rubber content of CR was between 97.95% and 104.12%. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
