| 橡胶O型圈表面涂覆用水性PTFE改性涂料的制备及应用 |
| Study on preparation and application of the water-borne PTFE modified lubricant coating for rubber o-rings |
| 投稿时间：2017-04-01 修订日期：2017-04-01 |
| DOI： |
| 中文关键词: 橡胶O型圈 水性PTFE改性涂料 自润滑 低摩擦系数 装配 |
| 英文关键词: rubber o-rings the water-borne PTFE modified coating lubricant low coefficient of friction assembly |
| 基金项目:安徽省绿色高分子材料重点实验室资助(编号:2015kf10) |
|
| 摘要点击次数: 1559 |
| 全文下载次数: 695 |
| 中文摘要: |
| 使用水性聚氨酯、水性丙烯酸树脂、氨基树脂为改性树脂,与水性聚四氟乙烯PTFE乳液复配,经混合分散、砂磨、过滤等工艺过程,制备出涂覆橡胶O型圈表面的水性PTFE改性自润滑涂料。结果表明,研制的水性PTFE改性自润滑涂料通过滚喷工艺喷涂橡胶O型圈表面,固化后形成的涂层对橡胶O型圈表面附着力好、摩擦系数低,具有良好的自润滑性,方便橡胶O型密封圈的装配操作。 |
| 英文摘要: |
| Using water-borne polyurethane, water-based acrylic resin, amino resin as film forming the carrier, the water-borne PTFE modified coating for rubber o-rings has been prepared with water-borne PTFE emulsion lubrication materials by mixing dispersion, such as sanding, filtering process. The results show that the PTFE water-based lubricant coating is coated on the surface of the rubber o-rings by the roller coating technology, after curing, coating formed on the surface of a rubber o-rings has good adhesion,rubber o-rings have low coefficient of friction, which helps rubber O rings assembly. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
