文章摘要
橡胶并用比及离子化热塑性弹性体对EPDM/NBR并用胶性能的影响
Effects of Rubber Blending Ratio and Ionic Thermoplastic Elastomer on Properties of EPDM/NBR Blends
投稿时间：2016-08-17  修订日期：2016-08-17
DOI：
中文关键词: 离子化热塑性弹性体  三元乙丙橡胶  丁腈橡胶  并用胶  相容性
英文关键词: ionic thermoplastic elastomer  EPDM  NBR  blends  compatibility
基金项目:
作者单位E-mail
马文斌* 青岛科技大学 橡塑材料与工程教育部重点实验室 719367633@qq.com 
程超 青岛科技大学 橡塑材料与工程教育部重点实验室  
王诗凝 青岛科技大学 橡塑材料与工程教育部重点实验室  
肖建斌 青岛科技大学 橡塑材料与工程教育部重点实验室  
摘要点击次数: 937
全文下载次数: 447
中文摘要:
      研究橡胶并用比及相容剂离子化热塑性弹性体对三元乙丙橡胶（EPDM）/丁腈橡胶（NBR）并用胶性能的影响。结果表明：未加入相容剂时，随着EPDM/NBR并用比减小，并用胶的100%定伸应力和拉伸强度呈增大趋势，耐热氧老化和耐臭氧老化性能下降，耐油性能提高，EPDM与NBR的相容性较差；加入相容剂离子化热塑性弹性体后，并用胶的硬度、拉伸强度、撕裂强度和弹性能提高，EPDM与NBR的相容性显著改善。
英文摘要:
      The effects of rubber blending ratio and compatibilizer ionic thermoplastic elastomer on properties of EPDM/NBR blends were studied.The results showed that，when the compatibilizer was not added，the modulus at 100% elongation and tensile strength of blends increased with EPDM/NBR blending ratio decreasing，and the heat oxygen aging resistance and ozone aging resistance decreased，the oil resistance was improved，and the compatibility between EPDM and NBR was poor.After adding the ionic thermoplastic elastomer，the hardness，tensile strength，tear strength and elasticity of EPDM/NBR blends increased，and the compatibility between EPDM and NBR was improved significantly.
Author NameAffiliationE-mail
MA Wenbin Key Laboratory of Rubber-plastics of Ministry of Education,Qingdao University of Science and Technology 719367633@qq.com 
CHENG Chao Key Laboratory of Rubber-plastics of Ministry of Education,Qingdao University of Science and Technology  
WANG Shining Key Laboratory of Rubber-plastics of Ministry of Education,Qingdao University of Science and Technology  
XIAO Jianbin Key Laboratory of Rubber-plastics of Ministry of Education,Qingdao University of Science and Technology  
查看全文   查看/发表评论  下载PDF阅读器
关闭