| 无机填料对三元乙丙橡胶耐汽车合成制动液性能的影响 |
| Effect of Inorganic Filler on Automomile Synthetic Brake Fluid Resistance of EPDM |
| 投稿时间：2016-03-25 修订日期：2016-03-25 |
| DOI： |
| 中文关键词: 无机填料 三元乙丙橡胶 耐制动液 |
| 英文关键词: inorganic filler EPDM brake fluid resistance |
| 基金项目: |
|
| 摘要点击次数: 1451 |
| 全文下载次数: 1536 |
| 中文摘要: |
| 研究无机填料锻烧陶土、滑石粉、纳米碳酸钙、Creat E2和强威粉TNK对三元乙丙橡胶耐汽车合成制动液性能的影响。结果表明：对于过氧化物硫化体系，无机填料的种类对体系硫化特性无明显的影响；添加Creat E2的胶料门尼粘度最小，而添加强威粉TNK的胶料门尼粘度最大；Creat E2的补强效果最佳；加入纳米碳酸钙和强威粉TNK可以有效降低硫化胶的压缩永久变形；添加Creat E2的硫化胶耐制动液综合性能最优。 |
| 英文摘要: |
| The effects of inorganic fillers—calcined clay，talcum powder，nano calcium carbonate，Creat E2 and TNK on the automomile synthetic brake fluid resistance of EPDM were investigated.The results showed that，for peroxide curing system，the different inorganic fillers had no significant difference on curing characteristics of the compounds.Mooney viscosity of the Creat E2 filled compound was minimum，and that of the TNK filled compound was maximum.The reinforcing effect of Creat E2 was the best，while nano calcium carbonate and TNK could effectively reduce the compression permanent set of the vulcanizates.The vulcanizate contained Creat E2 had the best brake fluid resistance. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
