| 气固法氯磺化聚乙烯在冶金胶辊包覆胶中的应用 |
| Application of Chlorosulfonated Polyethylene by Gas-Solid Phase Method in Rubber Covering Compound for Metallurgy Rubber Roller |
| 投稿时间：2015-11-17 修订日期：2015-11-17 |
| DOI： |
| 中文关键词: 氯磺化聚乙烯 气固法 溶液法 冶金胶辊 包覆胶 |
| 英文关键词: chlorosulfonated polyethylene gas-solid phase method solution method metallurgy rubber roller rubber covering compound |
| 基金项目: |
|
| 摘要点击次数: 830 |
| 全文下载次数: 460 |
| 中文摘要: |
| 研究气固法氯磺化聚乙烯（CSM）3570在冶金胶辊包覆胶配方中的应用，并与溶液法CSM（海帕龙40）进行对比。结果表明：气固法CSM3570红外光谱的特征吸收峰的位置与海帕龙40一致；在冶金胶辊包覆胶配方（CSM 100，炭黑 70，环氧大豆油 15，粘合增进剂 3，加工助剂 2，其他助剂 2，防老剂 3，助交联剂PDM 1，环氧树脂 20，促进剂 3.5，合计 219.5）中以CSM3570等量替代海帕龙40，胶料的综合性能比较相近，均符合相关标准要求，且可以顺利完成胶辊生产的各个工序。 |
| 英文摘要: |
| The application of chlorosulfonated polyethylene（CSM）3570 by gas-solid phase method in rubber covering compound for metallurgy rubber roller was studied and compared with chlorosulfonated polyethylene（Hypalon 40） by solution method.The test results showed that，the position of characteristic absorption peaks of the infrared spectrum of CSM 3570 and Hypalon 40 were basically the same.With the CSM 3570 instead of Hypalon 40 in formula of rubber covering compound for metallurgy rubber roller（CSM 100，carbon black 70，epoxy soybean oil 15，adhesion promoter 3，processing aid 2，other additive 2，antioxidant 3，crosslinking agent PDM 1，epoxy resin 20，promoter 3.5，total 219.5），compound properties of the former closer to the latter，met the requirements of relative standard，and could successfully complete the various processes of the production of the roller. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
