| 硫化介质温度对轮胎硫化特性的影响 |
| Effect of Curing Medium Temperature on Tire Curing Characteristics |
| |
| DOI： |
| 中文关键词: 轮胎 硫化 过热水温度 蒸汽温度 有限元分析 |
| 英文关键词: tire cure over-hot water temperature steam temperature finite element analysis |
| 基金项目:江苏省道路载运工具新技术应用重点实验室开放基金项目（BM2008206009）；江苏省高校自然科学研究面上项目（12KJB430006）；江苏省普通高校研究生科研创新计划项目（CXZZ12_0666） |
|
| 摘要点击次数: 607 |
| 全文下载次数: 314 |
| 中文摘要: |
| 建立11.00R25轮胎硫化-传热耦合有限元模型，分别采用多维模型和混合定律模型模拟橡胶材料和橡胶-帘线复合材料，采用Isayev焦烧模型、经典内生热模型和混合动力学模型模拟橡胶的硫化特性，研究硫化介质温度对轮胎硫化特性的影响。结果表明，蒸汽温度对轮胎硫化影响较大，提出的分布区块法可以用来合理匹配蒸汽和过热水的温度。 |
| 英文摘要: |
| In this study，the coupled finite element models of curing kinetic and heat transfer of 11.00R25 tire were established.The models for rubber and rubber-cord composite material were simulated by multidimensional modeling and mixture modeling methods，respectively.The curing characteristics of rubber were simulated by using Isayev induction model， classical heat generation model and hybrid dynamic model.The effect of curing medium temperature on tire curing characteristics was then investigated by using the FEA models.The results showed that the steam temperature had significant influence on tire vulcanization.By using block method， the temperatures of steam and over-hot water were better distributed and matched. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
