| 轮胎外形轮廓检测系统的研制 |
| Development of Inspection System for Tire Section Profile |
| |
| DOI： |
| 中文关键词: 轮胎 断面轮廓 跳动 激光三角测距 检测系统 |
| 英文关键词: tire section profile run-out laser triangulation method inspection system |
| 基金项目: |
|
| 摘要点击次数: 696 |
| 全文下载次数: 334 |
| 中文摘要: |
| 基于激光三角测距原理研制轮胎外形轮廓检测系统，以实现轮胎断面轮廓和跳动的检测。该检测系统由运动控制系统、数据采集系统和数据处理系统3个部分组成。运动控制系统控制激光传感器的定位和轨迹；数据采集系统采集轮胎外形轮廓各点的坐标值；数据处理系统对采集到的数据进行滤波和平滑，得到轮胎断面轮廓图和跳动曲线。试验结果表明，该检测系统的重复性好，精度满足工程要求。 |
| 英文摘要: |
| The tire section profile and run-out inspection system was developed based on the principle of distance measurement with laser triangulation method.This inspection system was composed of motion control system，data acquisition system and data processing system.The motion control system controlled the position and trajectory of the laser sensor. The data acquisition system acquired the coordinates of the selected points on the tire surface.The data processing system filtered and smoothed the collected data，and gave tire section profile and run-out curve.The experimental results showed that，the repeatability of the system was good， and the precision met the engineering requirements. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
