文章摘要
乙烯丙烯酸酯橡胶共混改性硅橡胶的性能研究
Study on Properties of MVQ/AEM Blend
  
DOI：
中文关键词: 乙烯丙烯酸酯橡胶  硅橡胶  并用胶  物理性能  耐油性能
英文关键词: AEM  MVQ  blend  physical property  oil resistance
基金项目:
作者单位
谢尊虎 青岛科技大学 橡塑材料与工程教育部重点实验室 
李甜甜 青岛科技大学 橡塑材料与工程教育部重点实验室 
李建芳 青岛科技大学 橡塑材料与工程教育部重点实验室 
邢祥菊 青岛科技大学 橡塑材料与工程教育部重点实验室 
肖建斌 青岛科技大学 橡塑材料与工程教育部重点实验室 
摘要点击次数: 769
全文下载次数: 226
中文摘要:
      将乙烯丙烯酸酯橡胶（AEM）按照不同比例与硅橡胶（MVQ）进行共混，研究并用比对MVQ/AEM并用胶的硫化特性、物理性能、耐油性能和动态力学性能的影响。结果表明：随着AEM用量的增大，MVQ/AEM并用胶的硫化时间延长，MH减小，物理性能明显改善；经过热空气老化后，并用胶的拉伸强度保持率和拉断伸长率保持率均随着AEM用量的增大而减小，耐老化性能降低；并用胶在ASTM 1#油和ASTM 3#油中浸泡后体积变化率和质量变化率减小，耐油性能改善。动态力学分析结果表明，AEM和MVQ具有良好的相容性，二者并用后低温性能下降，损耗因子逐渐增大。
英文摘要:
      The effect of blending ratio of ethylene-acrylic elastome（AEM） and methyl vinyl silicone rubber（MVQ） on the curing characteristic，physical properties，oil resistance and dynamical mechanical properties of MVQ/AEM blend was investigated.The results showed that，as the content of AEM increased，the optimum curing time of MVQ/AEM blend prolonged，maximum torque decreased and the physical properties of vulcanizates were improved.After hot air aging，as the content of AEM increased，the retention of tensile strength and elongation at break of the MVQ/AEM blend decreased，indicating decreased aging resistance.The oil resistance was improved with the increase of AEM content，indicated by the reduced volume change and mass change of vulcanizates dipped in ASTM 1# and ASTM 3# oil.The DMA test results showed that，AEM and MVQ had good compatibility，but the low temperature performance of MVQ decreased by blending with AEM and the loss factor increased gradually with the increase of AEM content.
Author NameAffiliation
XIE Zunhu Qingdao University of Science and Technology 
LI Tiantian Qingdao University of Science and Technology 
LI Jianfang Qingdao University of Science and Technology 
XING Xiangju Qingdao University of Science and Technology 
XIAO Jianbin Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭