文章摘要
3种增塑剂对氯磺化聚乙烯橡胶性能的影响
Effects of Three Plasticizers on Properties of Chlorosulfonated Polyethylene Rubber
  
DOI：
中文关键词: 增塑剂  氯磺化聚乙烯橡胶  低温脆性  阻燃性能
英文关键词: plasticizer  chlorosulfonated polyethylene rubber  low-temperature brittleness  flame retardancy
基金项目:
作者单位
袁彬彬 北京化工大学 北京市新型高分子材料制备与加工重点实验室 
刘力 北京化工大学 北京市新型高分子材料制备与加工重点实验室 
梁继竹 江阴海达橡塑股份有限公司 
张立群 北京化工大学 北京市新型高分子材料制备与加工重点实验室 
摘要点击次数: 795
全文下载次数: 336
中文摘要:
      研究增塑剂TOTM，TP-95和TP-90B对氯磺化聚乙烯橡胶性能的影响，并与增塑剂DOP进行对比。结果表明：加入增塑剂TP-95和TP-90B的胶料t90缩短，而加入增塑剂TOTM的胶料t90延长；加入增塑剂TP-90B的硫化胶物理性能较好；增塑剂TOTM具有更好的热稳定性；加入增塑剂可提高硫化胶的低温脆性，增塑剂TP-95硫化胶的低温脆性最佳；加入增塑剂会降低硫化胶的阻燃性能，增塑剂TP-90B硫化胶的阻燃性能下降程度最小。
英文摘要:
      The effects of plasticizer TOTM，TP-95 and TP-90B on the properties of chlorosulfonated polyethylene rubber were investigated，and compared to plasticizer DOP.The results showed that，thet90 of compound was shortened with TP-95 or TP-90B，but extended with TOTM；the physical properties of vulcanizate with TP-90B were better；and vulcanizates with TOTM had better thermal stability.The low-temperature brittleness of vulcanizate was improved by using plasticizers，and TP-95 presented the best result.The flame retardant property of vulcanizate was decreased by using plasticizers，and the smallest decrease was with TP-90B.
Author NameAffiliation
YUAN Bin-bin Beijing University of Chemical Technology 
LIU Li Beijing University of Chemical Technology 
LIANG Ji-zhu Jiangyin Haida Rubber and Plastics Co.，Ltd 
ZHANG Li-qun Beijing University of Chemical Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭