| 硫化体系对动态硫化NBR/PA6热塑性硫化胶性能的影响 |
| Influence of Curing Systems on Properties of NBR/PA6 TPV Prepared by Dynamic Vulcanization |
| |
| DOI： |
| 中文关键词: NBR 聚己内酰胺 热塑性硫化胶 动态硫化 硫化体系 |
| 英文关键词: NBR polycaprolactam thermoplastic vulcanizate dynamic vulcanization curing system |
| 基金项目: |
|
| 摘要点击次数: 622 |
| 全文下载次数: 126 |
| 中文摘要: |
| 采用动态硫化法制备NBR/聚己内酰胺(PA6)热塑性硫化胶(TPV)，研究硫化体系对其性能的影响。结果表明：与硫化剂HVA-2/促进剂DM硫化体系相比，采用硫化剂SP-1045/促进剂氯化亚锡硫化体系制备NBR/PA6 TPV的加工性能和物理性能较好，且体系中PA6结晶度较小；当硫化剂HVA-2/促进剂DM并用比为1.95/0.49或硫化剂SP-1045/促进剂氯化亚锡并用比为2.6/0.32时，制备NBR/PA6 TPV的NBR分散相粒径较小、分散较均匀和综合物理性能较好。 |
| 英文摘要: |
| The NBR/polycaprolactam(PA6) thermoplastic vulcanizate(TPV) was prepared by dynamic vulcanization，and the influence of curing systems on the properties of TPV was investigated.The results showed that，compared to curing system using vulcanizing agent HVA-2 and accelerator DM,the TPV prepared by vulcanizing agent SP-1045 and accelerator SnCl2 had better processing and physical properties,and the crystallinity of PA6 was lower. In addition,when the blend ratio of vulcanizing agent HVA-2/accelerator DM was 1.95/0.45 or the blend ratio of vulcanizing agent SP-1045/accelerator SnCl2 was 2.6/0.32,the dispersion phase NBR was in small size and uniformly distributed,and the comprehensive physical properties were good. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
