溴化丁基胶乳乳化工艺研究 |
Emulsification Process for Preparation of Bromobutyl Rubber Latex |
|
DOI: |
中文关键词: 溴化丁基胶乳 乳化工艺 产率 粒径 |
英文关键词: bromobutyl rubber latex emulsification process yield particle size |
基金项目:国家自然科学基金资助项目(10876033) |
|
摘要点击次数: 659 |
全文下载次数: 119 |
中文摘要: |
对制备溴化丁基胶乳的乳化工艺进行研究。优化乳化工艺条件为:乳化剂 油酸钾/十二烷基苯磺酸钠(用量比为5/2.5),溶液中BIIR质量分数 0.15,剪切速率 16 000 r·min-1,乳化时间 30 min。采用优化工艺,溴化丁基胶乳的产率可达90%以上,胶乳各项性能能够满足涂覆和浸渍等工艺要求。 |
英文摘要: |
The emulsification process for preparation of bromobutyl rubber latex was investigated.The optimized emulsification conditions were as follows:emulsifiers were potassium oleate/sodium dodecyl-benzenesulfonate with a mass ratio of 5/2.5;mass fraction of BIIR in the solution was 0.15,shear rate was selected at 16 000 r·min-1;the emulsified time was 30 min.The yield of bromobutyl rubber latex was more than 90% by using optimized process,and the properties of latex met the requirements of coating and dipping processes. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |