| 两端进料式宽幅片材挤出机头流道流场分析 |
| Analysis of fluid field in wide sheet extruder die with both end feeding |
| |
| DOI： |
| 中文关键词: 挤出机头 两端进料 宽幅片材 速度分布 压力分布 |
| 英文关键词: extrusion die both end feeding wide sheet velocity distribution pressure distribution |
| 基金项目: |
|
| 摘要点击次数: 594 |
| 全文下载次数: 0 |
| 中文摘要: |
| 建立两端进料式宽幅片材挤出机头流道三维几何模型，并对物料在流道内的流动进行数值模拟。模拟结果表明，流道内部压力在沿挤出方向递减的同时逐渐趋于横向均匀。高度分别为5和8 mm的阻尼部分对比分析表明，适当调整阻尼部分高度，可影响出口区域挤出速度横向分布，使横向挤出压力和速度更均匀。 |
| 英文摘要: |
| The three-dimensional models were established for wide sheet extruder die with both end feeding to simulate the flow field.The results showed that，the pressure gradually became uniform at lateral while it decreased at extrusion direction.Comparison study between 5 and 8 mm of damper height showed that the lateral velocity distribution of outlet area was affected by the height of damper，and by adjusting the height of damper properly，the extruding pressure and velocity of the fluid flow became more uniform at lateral. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
