文章摘要
硬脂酸盐热稳定剂对CPE脱氯化氢热降解性的影响
Effect of stearate stabilizers on dehydrochlorination of CPE
  
DOI:
中文关键词: 氯化聚乙烯  硬脂酸盐热稳定剂  脱氯化氢  热降解性  刚果红法
英文关键词: CPE  stearate heat stabilizer  dehydrochlorination  heat degradation  Congo Red Method
基金项目:
作者单位
张军 南京工业大学 材料科学与工程学院 
林珩 南京工业大学 材料科学与工程学院 
摘要点击次数: 782
全文下载次数: 560
中文摘要:
      采用刚果红法研究硬脂酸盐热稳定剂对氯化聚乙烯(CPE)脱氯化氢热降解性的影响。结果表明,随着硬脂酸盐用量增大,CPE的脱氯化氢温度呈升高趋势,脱氯化氢初始时间呈延长趋势;采用硬脂酸铅和硬脂酸钡的CPE脱氯化氢温度较高,脱氯化氢初始时间较长;硬脂酸铅/硬脂酸钡、硬脂酸铅/硬脂酸钙和硬脂酸钙/硬脂酸钡并用比分别为1∶1,2∶1和1∶3时,CPE的脱氯化氢温度较高,并用比分别为3∶1,2∶1和1∶1时,CPE的脱氯化氢初始时间较长。
英文摘要:
      The effect of the stearate stabilizers on the dehydrochlorination of CPE was investigated by Congo Red Method.The results showed that the dehydrochlorination temperature of CPE tended to increase and the initial dehydrochlorination time tended to extend as the stearate level increased;the dehydrochlorination temperature was higher by using lead stearate and barium stearate and its initial time was longer;and the dehydrochlorination temperature of CPE was higher by using lead stearate/barium stearate,lead stearate/calcium stearate,or calcium stearate/barium stearate with blending ratios of 1:1,2:1 and 1:3 respectively,and the initial dehydrochlorination time was longer when the above blending ratios changed to 3:1,2:1 and 1:1 respectively.
Author NameAffiliation
ZHANG Jun Nanjing University of Technology 
LIN Heng Nanjing University of Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭