文章摘要
二段硫化条件对共聚型氯醚橡胶性能的影响
Effect of post-cure conditions on properties of epichlorohydrin copolymer
  
DOI:
中文关键词: 共聚型氯醚橡胶  二段硫化  压缩永久变形  交联密度  耐油性能  耐热性能
英文关键词: epichlorohydrin copolymer  post-cure  compression set  crosslink density  oil resistance  heat resistance
基金项目:
作者单位
李志伟 华南理工大学 材料学院 
王迪珍 华南理工大学 材料学院 
程万里 华南理工大学 材料学院 
摘要点击次数: 772
全文下载次数: 1
中文摘要:
      研究了二段硫化条件对共聚型氯醚橡胶(ECO)性能的影响。二段硫化后,ECO的100%定伸应力增大,拉伸强度和邵尔A型硬度先增大后减小,扯断伸长率、扯断永久变形及撕裂强度减小;耐热性能变化不大;常温下的耐油性能提高。高温短时的二段硫化有利于降低压缩永久变形。当二段硫化温度超过150 ℃,交联密度先增大后减小,且温度越高减小得越快。
英文摘要:
      The effect of the post-cure conditions on properties of epichlorohydrin copolymer(ECO) was investigated.The results showed that when ECO was post-cured,the modulus at 100% increased,the tensile strength and Shore A hardness increased at first and then decreased,the elongation at break,tensile permanent set and tear strength decreased;the heat resistance changed little;and the oil resistance at room temperature improved.The post-cure at high temperature for shorter time was beneficial to decreasing the compression set.The crosslink density increased at first and then decreased as the post-cure temperature reached 150 ℃,and the higher the post-cure temperature was,the faster the crosslink density decreased.
Author NameAffiliation
LI Zhiwei South China University of Technology 
WANG Dizhen South China University of Technology 
CHENG Wanli South China University of Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭