文章摘要
两亲聚氨酯弹性体(APU)的研究* Ⅱ.IPN型APU制备及力学性能
Study on Amphipathic Polyurethane Elastomer Ⅱ.Preparation of IPN Type APU and Its Mechanical Properties
  
DOI：
中文关键词: 聚氨酯弹性体  两亲聚合物  互穿聚合物网络  力学性能
英文关键词: polyurethane elastomer  amphipathic polymer  interpenetrating polymer network  mechanical properties
基金项目:国家自然科学基金资助项目
作者单位
庞永新 华南理工大学 
吴燕 华南理工大学 
潘慧 华南理工大学 
贾德民 华南理工大学 
摘要点击次数: 888
全文下载次数: 580
中文摘要:
      以聚酯型聚氨酯为疏水组分，光固化聚乙二醇为亲水组分，通过溶液聚合制备了具有互穿聚合物网络(IPN)结构的APU。研究了亲疏水组分比例、光固化条件等因素对IPN型APU力学性能的影响。试验结果表明，当APU中光敏剂质量分数为0.010，光照前停放20 h，光照时间为6 min时，IPN型APU的力学性能最佳。
英文摘要:
      An amphipathic polyurethane elastomer(APU) with the interpenetrating polymer network(IPN) was prepared by the solution polymerization using polyester urethane as hydrophobic component and light-cured polyglycol as hydrophibic component.The influence of the hydrophibic and hydrophobic components ratio，and the light curing condition on the mechanical properties of IPN type APU was investigated.The results showed that the optimum mechanical properties of IPN type APU were obtained if 0.010 part of light sensitive agent by mass in APU was used，APU was exposed to the light for 6 min and conditioned for 20 h before light exposure.
Author NameAffiliation
Pang Yongxin South China University of Technology 
Wu Yan South China University of Technology 
Pan Hui South China University of Technology 
Jia Demin South China University of Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭