文章摘要
陈银香,续富琴,刘宝玲,侯朝阳.高导热减薄硫化胶囊在全钢载重子午线轮胎生产中的应用[J].橡胶科技,2026,24(2):0108-0112. 本文二维码信息
二维码(扫一下试试看!)
高导热减薄硫化胶囊在全钢载重子午线轮胎生产中的应用
Application of High Thermal Conductivity Thinning Curing Bladder in Production of Truck and Bus Radial Tire
投稿时间:2024-09-26  修订日期:2024-09-26
DOI:10.12137/j.issn.2095-5448.2026.02.0108
中文关键词: 全钢载重子午线轮胎  高导热减薄硫化胶囊  硫化测温  仿真  硫化效率
英文关键词: truck and bus radial tire  high thermal conductivity thinning curing bladder  vulcanization temperature measurement  simulation  vulcanization efficiency
基金项目:
中图分类号:
作者单位E-mail
陈银香* 风神轮胎股份有限公司 cyxiang1986@126.com 
续富琴 风神轮胎股份有限公司  
刘宝玲 风神轮胎股份有限公司  
侯朝阳 风神轮胎股份有限公司  
摘要点击次数: 274
全文下载次数: 87
中文摘要:
      研究高导热减薄硫化胶囊在全钢载重子午线轮胎生产中的应用。结果表明:适当提高硫化胶囊导热系数可以提升轮胎内部的热传导效率,从而缩短硫化周期和提高生产效率;匹配合理的硫化胶囊尺寸,可以保证硫化胶囊的使用寿命不缩短;硫化胶囊的中心厚度由9 mm降至6 mm、导热系数由0.22 W·m-1·K-1升至0.31 W·m-1·K-1时,硫化周期由60 min降至56 min,轮胎硫化产能每年提升约16.8万条,且成品轮胎质量相当,胶囊消耗成本不增大。
英文摘要:
      The application of high thermal conductivity thinning curing bladders in the production of truck and bus radial tire was studied.The results indicated that properly increasing the thermal conductivity of curing bladders could improve the internal heat conduction efficiency of tires,thereby shorten the vulcanization cycle and improve production efficiency.Matching the appropriate sizes of curing bladders could ensure that the lifespans of the curing bladders were not reduced.When the center thickness of the curing bladder was reduced from 9 mm to 6 mm,the thermal conductivity increased from 0.22 W·m-1·K-1 to 0.31 W·m-1·K-1,the vulcanization cycle were reduced from 60 min to 56 min,the annual tire vulcanization capacity increased by about 168 000,moreover,the quality of the finished tires remained equivalent,and the costs of bladder consumption did not increase.
Author NameAffiliationE-mail
CHEN Yinxiang Aeolus Tyre Co., Ltd cyxiang1986@126.com 
XU Fuqin Aeolus Tyre Co., Ltd  
LIU Baoling Aeolus Tyre Co., Ltd  
HOU Chaoyang Aeolus Tyre Co., Ltd  
查看全文   查看/发表评论  下载PDF阅读器