| 连永胜,李晓明,焦彦超,张开开,贾永军,冯海真.一次法成型工程机械子午线轮胎胎体反包帘线弯曲缺陷的研究[J].橡胶科技,2025,23(11):0644-0647. |
二维码（扫一下试试看！） |
| 一次法成型工程机械子午线轮胎胎体反包帘线弯曲缺陷的研究 |
| Study on Bending Defect of Carcass Turn-up Cord of Off-The-Road Radial Tire Using One-step Building Process |
| 投稿时间：2025-03-17 修订日期：2025-03-17 |
| DOI：10.12137/j.issn.2095-5448.2025.11.0644 |
| 中文关键词: 工程机械子午线轮胎 一次法成型 硫化 胎体反包帘线弯曲 |
| 英文关键词: off-the-road radial tire one-step building vulcanization carcass turn-up cord bending |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 451 |
| 全文下载次数: 180 |
| 中文摘要: |
| 研究一次法成型工程机械子午线轮胎胎体反包帘线弯曲缺陷的原因，并提出解决措施。结果表明：胎体反包帘线弯曲可能发生在轮胎的成型工序或硫化工序；成型工序中导致胎体反包帘线弯曲的主要因素有胎圈包布、扣圈过程和反包过程；硫化工序中导致胎体反包帘线弯曲的主要因素为合模过程。 |
| 英文摘要: |
| The reasons for the carcass turn-up cord bending of off-the-road radial tire using one-step building process were studied and the solutions were proposed.The results indicated that the carcass turn-up cord bending defect might occur during the building and vulcanization processes of tire.The main factors causing carcass turn-up cord bending in the building process included bead wrapping，loop fastening process and reverse wrapping process.The main factor causing carcass turn-up cord bending in the vulcanization process was the molding process. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
