| 劳龙龙,杨京辉,李涛,袁金琪,代玉龙.轮胎胎面翼胶挤出破边问题改善方法的研究[J].橡胶科技,2022,20(3):0144-0146. |
二维码（扫一下试试看！） |
| 轮胎胎面翼胶挤出破边问题改善方法的研究 |
| Improvement Method of Extrusion Break Edge Problem of Tire Tread Wing Rubber |
| 投稿时间：2020-11-24 修订日期：2020-11-24 |
| DOI：10.12137/j.issn.2095-5448.2022.03.0144 |
| 中文关键词: 轮胎 胎面翼胶 挤出 破边 口型设计 |
| 英文关键词: tire tread wing rubber extrusion break edge die design |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1401 |
| 全文下载次数: 644 |
| 中文摘要: |
| 分析轮胎胎面翼胶在挤出过程中的破边问题，发现口型开型比设计、口型进胶口倒角设计和口型温度均为影响因素。通过减小口型开型比、增大口型进胶口倒角高度和深度及口型设定温度，胎面翼胶挤出破边问题得到有效改善。 |
| 英文摘要: |
| The break edge problem of tire tread wing rubber during extrusion was analyzed.It was found that the opening ratio design of die，the chamfer design of the rubber inlet of die and die temperature were the influencing factors.By reducing the opening ratio of the die，increasing the chamfer height and depth of the rubber inlet of die and the set temperature，the extrusion break edge problem of tread wing rubber was effectively improved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
