| 胡思芳,张磊,徐祥越,韩阳,邓龙,高硕.硫化机热工管路双排双抽改造[J].橡胶科技,2020,18(3):0171-0173. |
二维码（扫一下试试看！） |
| 硫化机热工管路双排双抽改造 |
| Double Row and Double Pumping Transformation of Curing Press Thermal Pipeline |
| 投稿时间：2019-10-11 修订日期：2019-10-11 |
| DOI：10.12137/j.issn.2095-5448.2020.03.0171 |
| 中文关键词: 硫化机 过热水硫化 泄压 双排 双抽 生产效率 |
| 英文关键词: curing press superheated water sulfuration pressure relief double row double pumping production efficiency |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1586 |
| 全文下载次数: 5 |
| 中文摘要: |
| 为解决硫化胶囊泄压慢导致硫化机无法开模以及轮胎过硫的问题，研究过热水硫化工艺硫化机热工管路改造方案。设计了3种改造方案：在硫化机进路增加0 MPa热水排，在硫化机进路增加抽真空，在硫化机进路同时增加0 MPa热水排和抽真空。结果表明：在硫化机进路同时增加0 MPa热水排和抽真空，泄压量明显提升，硫化机开模前硫化胶囊内的压力能够全部排净，改进效果最好；硫化机可以自动开模，单机生产效率提高，轮胎过硫问题得到解决。 |
| 英文摘要: |
| In order to solve the problem of slow pressure relief of curing bladder，which led to the failure of curing press mold opening and tire over vulcanization，thermal pipeline of curing press using the superheated water curing process was studied.Three transformation schemes were designed：adding 0 MPa hot water discharge in the curing press route，adding vacuum pumping in the curing press route，adding 0 MPa hot water discharge and vacuum pumping in the curing press route at the same time.The results showed that the pressure in the curing bladder could be completely discharged before the mold opening of the curing press，and the effect of the improvement was the best.The mold could be opened automatically，the production efficiency of the single curing press was improved，and the problem of tire over vulcanization was solved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
