| 李东来,宁振祥,李学刚.带束层钢丝帘布双工位卷取单元结构的改进[J].橡胶科技,2015,13(5):41-44. |
二维码（扫一下试试看！） |
| 带束层钢丝帘布双工位卷取单元结构的改进 |
| Improvement of Two-station Winding Unit for Steel Cord Fabric |
| |
| DOI： |
| 中文关键词: 带束层 钢丝帘布 双工位卷取 结构改进 拉伸变形 小角度钢丝帘布裁断机 |
| 英文关键词: belt steel cord two-station winding structural improvement tensile deformation small angle steel cord cutter |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1167 |
| 全文下载次数: 697 |
| 中文摘要: |
| 改进带束层钢丝帘布自动生产线（小角度钢丝帘布裁断机）双工位卷取单元结构，以减少钢丝帘布卷取拉伸变形。改进后双工位卷取单元主要由入口机械对中、垫布纠偏机构、出口机械对中、小车导入、锁紧机构和过渡输送辊道组成，2个工位间帘布的过渡输送为无动力自由式辊道输送，帘布直接进入小车卷取。改进后小车式卷取采用可重复使用的尼龙垫布，帘布翻面在卷取工位内部完成，减速电机和锁紧气缸工艺参数满足生产要求，帘布卷取拉伸率小，工艺过程环保性好，成本低。 |
| 英文摘要: |
| In this study，the structure of two-station winding unit of the automatic production line (small angle steel cord cutter) of steel cord fabric for tire belt layer was improved to reduce the tensile deformation of the fabric during the winding process.The new winding unit was composed of centering at the entrance，corrective of mattress position，centering at the exit，leading-in device，locking mechanism and transition conveyor rollers.Unpowered rollers were used to transfer the fabric between stations and the fabric was directly winded on the collecting device.After improvement，the nylon mattress could be reused，turn-over of the fabric was completed within the winding unit，the tensile deformation of the fabric was low，the whole process was environmentally friendly，and the cost was low. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
