文章摘要
李红兰,杨忠全,李争凯.提高乳胶气囊耐疲劳性能的研究[J].橡胶科技,2015,13(1):19-22. 本文二维码信息
二维码（扫一下试试看！）
提高乳胶气囊耐疲劳性能的研究
Improvement of the Fatigue Resistance of Latex Bladder
  
DOI：
中文关键词: 乳胶气囊  耐疲劳性能  防老剂  天然胶乳
英文关键词: latex bladder  fatigue resistance  antioxidant  NR latex
基金项目:
中图分类号:
作者单位
李红兰 中国化工株洲橡胶研究设计院有限公司 
杨忠全 中国气象局干部培训学院湖南分中心 
李争凯 湖南省怀化气象局 
摘要点击次数: 1744
全文下载次数: 991
中文摘要:
      研究提高乳胶气囊（用天然胶乳制备）在高伸长率（高充盈）状态下耐疲劳性能的方法。结果表明，采用防老剂CPL和防老剂DTBHQ并用（并用比1/1），增加胶乳预硫化工艺（60 ℃下水浴恒温4 h）和预硫化胶乳离心处理，乳胶气囊的耐疲劳性能明显提高，在700%伸长率下的平均疲劳次数达到85，产品性能可以满足国内市场要求。
英文摘要:
      The purpose of this study was to improve the fatigue resistance of latex bladder (prepared by NR latex) under highly inflated condition.The experimental test results showed that，in the optimized formulation and process，the antioxidant CPL and DTBHQ were jointly used at the ratio of 1/1，the latex was pre-vulcanized at 60 ℃ in water bath for 4 h，and the pre-vulcanized latex was treated by centrifugation.The average number of fatigue cycle to failure under 700% elongation reached 85，indicating significantly improved fatigue resistance of the obtained latex bladder.The product performance met the requirements of the domestic market.
Author NameAffiliation
Li Honglan Zhuzhou Rubber Research and Design Institute， ChemChina 
Yang Zhongquan China Meteorological Administration Cadre Training College of Hunan Branch 
Li Zhengkai Huaihua Meteorological Bureau 
查看全文   查看/发表评论  下载PDF阅读器