文章摘要
曹京欧,毛建清.采用低温硫化提高12.00R20载重子午线轮胎胎圈性能[J].橡胶科技,2013,11(7):43-44. 本文二维码信息
二维码（扫一下试试看！）
采用低温硫化提高12.00R20载重子午线轮胎胎圈性能
Improvement of Bead Performance of 12.00R20 TBR Tire by Low Temperature Curing
  
DOI：
中文关键词: 全钢载重子午线轮胎  低温硫化  胎圈  胎体  粘合胶  硫化测温
英文关键词: TBR tire  low temperature curing  bead  carcass  bonding compound  curing temperature
基金项目:
中图分类号:
作者单位
曹京欧 青岛科技大学；杭州朝阳橡胶有限公司 
毛建清 青岛科技大学；杭州朝阳橡胶有限公司 
摘要点击次数: 999
全文下载次数: 613
中文摘要:
      针对12.00R20全钢载重子午线轮胎使用中出现的胎圈损坏问题，测试胎圈破坏初始点——胎体反包端点粘合胶的等效硫化时间。通过采用低温硫化工艺（145℃），将胎体反包端点粘合胶的最高硫化温度控制在141℃，胎圈损坏的轮胎退赔率下降50%以上。
英文摘要:
      The bead damage of 12.00R20 TBR tire was analyzed. The initial break spot was at the end point of carcass turnup， and the equivalent curing time of the bonding compound in that area was investigated. It was found that， by using low temperature (145℃) curing process， in which the curing temperature of the bonding compound at the end point of carcass turnup was controlled under 141℃， the bead damage was reduced and the tire return rate due to bead damage decreased by more than 50%.
Author NameAffiliation
Cao Jingou Qingdao University of Science and Technology；Hangzhou Chaoyang Rubber Co.， Ltd. 
Mao Jianqing Qingdao University of Science and Technology；Hangzhou Chaoyang Rubber Co.， Ltd. 
查看全文   查看/发表评论  下载PDF阅读器