文章摘要
卢江荣,王玉峰,闫普选,黄天环,栗英亮,韩飞雪.NR/SBR并用胶撕裂性能和动态切割性能的研究[J].橡胶科技,2013,11(6):22-25. 本文二维码信息
二维码(扫一下试试看!)
NR/SBR并用胶撕裂性能和动态切割性能的研究
Tear Strength and Dynamic Cutting Resistance of NR/SBR Blends
  
DOI:
中文关键词: 天然橡胶  丁苯橡胶  并用胶  裤形试样  撕裂性能  动态切割性能
英文关键词: natural rubber  styrene-butadiene rubber  blend  trouser type test piece  tear strength  dynamic cutting resistance
基金项目:
中图分类号:
作者单位
卢江荣 桂林电子科技大学材料科学与工程学院 
王玉峰 桂林电子科技大学材料科学与工程学院 
闫普选 桂林电子科技大学材料科学与工程学院 
黄天环 桂林电子科技大学材料科学与工程学院 
栗英亮 桂林电子科技大学材料科学与工程学院 
韩飞雪 桂林电子科技大学材料科学与工程学院 
摘要点击次数: 876
全文下载次数: 666
中文摘要:
      分析天然橡胶(NR)/丁苯橡胶(SBR)并用比对胶料撕裂强度(裤形试样)和动态切割性能的影响。结果表明,随着SBR用量增大,试样的撕裂过程由多节撕裂过渡到平稳撕裂,撕裂强度峰值下降,谷值上升。NR为连续相时,胶料易产生长距离撕裂且舌端不容易断裂,动态切割量大;SBR为连续相时,胶料割口扩展速度低且舌端容易断裂,动态切割量小。撕裂强度谷值高的胶料动态切割量小。
英文摘要:
      The influence of the blending ratio of natural rubber (NR)/styrene-butadiene rubber (SBR) on the trouser tear strength and dynamic cutting resistance of the blends was studied. It was found that with the increase of the amount of SBR, the tear mechanism showed a transition from stick-slip tearing or knotty tearing to steady tearing, the peak value of tear force decreased and the bottom value increased. When the continuous phase was NR,the compound showed long-range tearing characteristic, the crack tip was relatively hard to be broken and the tear energy under dynamic loading was high. On the other hand, when the continuous phase was SBR, the crack growth rate was low, the crack tip was prone to be broken and the tear energy was relatively low. It was also found that the compound having a higher bottom value of tear force usually possessed lower tearing energy under dynamic loading.
Author NameAffiliation
Lu Jiangrong School of Materials Science and Engineering Guilin University of Electronic Technology 
Wang Yufeng School of Materials Science and Engineering Guilin University of Electronic Technology 
Yan Puxuan School of Materials Science and Engineering Guilin University of Electronic Technology 
Huang Tianhuan School of Materials Science and Engineering Guilin University of Electronic Technology 
Li Yingliang School of Materials Science and Engineering Guilin University of Electronic Technology 
Han Feixue School of Materials Science and Engineering Guilin University of Electronic Technology 
查看全文   查看/发表评论  下载PDF阅读器