| 查直方.矿用设备冷硫化衬胶工艺[J].橡胶科技,2013,11(3):33-35. |
二维码（扫一下试试看！） |
| 矿用设备冷硫化衬胶工艺 |
| Cold Cure Lining of Mining Equipment |
| |
| DOI： |
| 中文关键词: 冷硫化衬胶 矿用设备 粘合剂 粘接 粘合强度 |
| 英文关键词: cold cure lining mining equipment adhesive bonding adhesion strength |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1297 |
| 全文下载次数: 1148 |
| 中文摘要: |
| 简介矿用设备的冷硫化衬胶工艺。主要工艺步骤有设备检查、金属表面和胶板的处理、刷涂粘合剂、粘接、衬胶质量检验。胶板与金属表面的压贴滚压从胶板中部开始，滚压压力均匀，气体从胶板两边赶出。冷硫化衬胶工艺具有操
作简便、衬胶粘合强度高和即粘即用的特点。 |
| 英文摘要: |
| The cold cure lining of mining equipments was presented. Main process steps included equipment inspection， pretreatment of the metal surface and rubber sheet， brush coating of adhesive， bonding， and quality inspection. The press bonding of rubber and metal started in the middle part of rubber sheet. The pressure was uniform and the air was removed from both sides. This cold cure lining process was simple and the initial adhesion strength was high. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
