|
二维码（扫一下试试看！） |
| BB430型密炼机混炼工艺的研究 |
| Investigation on Mixing Process for BB430 Mixer |
| Received:April 17, 2017 Revised:April 17, 2017 |
| DOI： |
| 中文关键词: 密炼机；6WI转子；混炼工艺；物理性能；加工性能 |
| 英文关键词: mixer；6WI rotor；mixing process；physical property；processing property |
| 基金项目: |
| 中图分类号: |
| Author Name | Affiliation | E-mail | | Sun Maozhogn* | Tire technology Alliance | od0018@tta-solution.com | | Siegfried Ratzeburg | 特拓青岛轮胎技术有限公司 | | | Zheng Kun | 特拓青岛轮胎技术有限公司 | | | Liu Huaqiao | 特拓青岛轮胎技术有限公司 | | | Yuan Jinqi | 特拓青岛轮胎技术有限公司 | | | Yang Jinghui | 特拓青岛轮胎技术有限公司 | |
|
| Hits: 1083 |
| Download times: 557 |
| 中文摘要: |
| 试验研究BB430型密炼机混炼工艺对混炼效果的影响。结果表明，与传统混炼工艺相比，使用胶药炭同投或胶药炭油同投配以50～60 r·min-1的高速混炼工艺混炼的胶料物理性能相当或较优，分散性和加工性能较高，同时生产效率提高20%～27%。 |
| 英文摘要: |
| The influence of the mixing process in BB430 mixer on the mixing result was investigated.The results showed that，compared with the traditional mixing process，by using high speed mixing process in which the rotor speed was 50～60 r·min-1 and feeding rubber，additives and carbon black（and oil，if any） at the same time，the physical properties of the compound was same or better，the filler dispersion and processing property were better，and the productivity was improved by 20%～27%. |
|
View Full Text
View/Add Comment Download reader |
| Close |
