|
二维码（扫一下试试看！） |
| 全钢工程机械子午线轮胎一次法工艺胎体反包帘线弯曲的仿真研究 |
| Simulation Research on Bending of Carcass Turn-up Cord of All-steel Off-The-Road Radial Tire Using One-step Process |
| Received:July 19, 2024 Revised:July 19, 2024 |
| DOI： |
| 中文关键词: 全钢工程机械子午线轮胎；一次法成型；胎体反包帘线弯曲；成型；硫化；仿真分析 |
| 英文关键词: all-steel off-the-road radial tire；one-step method building；bending of carcass turn-up cord；building ；vulcanization；simulation analysis |
| 基金项目: |
| 中图分类号: |
| Author Name | Affiliation | E-mail | | LI Xiaoming* | Aeolus Tyre Co.,Ltd. Jiaozuo 454003
China | 512914153@qq.com | | WANG Zhiping | Aeolus Tyre Co.,Ltd. Jiaozuo 454003
China | | | LIAN Yongsheng | Aeolus Tyre Co.,Ltd. Jiaozuo 454003
China | | | LOU Zhaoyang | Aeolus Tyre Co.,Ltd. Jiaozuo 454003
China | | | XUE Xinxin | Aeolus Tyre Co.,Ltd. Jiaozuo 454003
China | | | LI Xiaopeng | Aeolus Tyre Co.,Ltd. Jiaozuo 454003
China | |
|
| Hits: 129 |
| Download times: 75 |
| 中文摘要: |
| 以14.00R25全钢工程机械子午线轮胎为例，采用Abaqus软件，针对一次法成型及硫化过程开展仿真研究，重现整个过程中胎体帘线的变化情况。结果表明，通过一次法工艺制造的轮胎，其胎体帘线弯曲现象没有出现在成型阶段，而是出现在硫化定型与合模阶段。该研究可为胎体反包帘线弯曲问题的解决提供参考。 |
| 英文摘要: |
| Taking the 14.00R25 all-steel off-the-road radial tire as an example，Abaqus software was used to conduct simulation research on the one-step method building and vulcanization process，reproducing the changes of the carcass cord throughout the entire process.The results showed that the bending phenomenon of the carcass cord did not occur during the building stage，but rather during the vulcanization setting and mold closing stages for tire manufactured through a one-step method process.This study could provide reference for solving the bending problem of carcass turn-up cord of tire. |
|
View Full Text
View/Add Comment Download reader |
| Close |
