|
二维码（扫一下试试看！） |
| 排凝在轮胎氮气硫化工艺中的应用研究 |
| Application of Condensate Discharging in Nitrogen Curing Process of Tire |
| Received:November 24, 2020 Revised:November 24, 2020 |
| DOI：10.12135/j.issn.1006-8171.2021.07.0452 |
| 中文关键词: 轮胎；氮气硫化；蒸汽排凝；氮气排凝；排凝时间 |
| 英文关键词: tire；nitrogen curing process；steam condensate discharging；nitrogen condensate discharging；condensate discharging time |
| 基金项目: |
| 中图分类号: |
| Author Name | Affiliation | E-mail | | zhangheng* | TTA(QINGDAO) TIRE TECHNOLOGY CO.,LTD | od0019@@tta-solution.com | | Siegfried Ratzeburg | TTA(QINGDAO) TIRE TECHNOLOGY CO.,LTD | |
|
| Hits: 803 |
| Download times: 733 |
| 中文摘要: |
| 在轮胎氮气硫化工艺中，设定不同的排凝间隔时间和排凝时间，通过内温变化确定合理的硫化工艺步序。结果表明，排凝间隔时间和排凝时间对硫化内温的影响较大。在硫化步序设定时，应首先设置排凝，排凝时间应根据蒸汽含水量和管路布局等因素确定，蒸汽进的最后阶段不需要排凝，而氮气阶段必须根据测温设定合理的排凝时间。 |
| 英文摘要: |
| In the nitrogen curing process of tire，different interval time and time of condensate discharging was set，and the reasonable curing process sequence was determined by the change of internal temperature.The results showed that the interval time and the time of condensate discharging had great influence on the internal temperature of vulcanization.In the setting of curing sequence，the first step was to set the condensate discharging.The condensate discharging time should be determined according to the steam moisture content and pipeline layout.In the final stage of steam inlet，it was not necessary to set the condensate discharging，while in the nitrogen stage，it was necessary to set the reasonable condensate discharging time according to the temperature measurement. |
|
View Full Text
View/Add Comment Download reader |
| Close |
