文章摘要
本文二维码信息
二维码(扫一下试试看!)
7.50-16 林业轮胎的设计
Design on 7.50-16 8PR Forestry Tire
Received:January 10, 2018  Revised:January 10, 2018
DOI:
中文关键词: 林业轮胎;加深块状花纹;结构设计;施工设计
英文关键词: forestry tire; extra deep block pattern; structure design;construction design
基金项目:
中图分类号:
Author NameAffiliationE-mail
XU Liling* Guizhou Tyre Co.,Ltd 26213614@qq.com 
QIU Yi Guizhou Tyre Co.,Ltd  
Hits: 786
Download times: 400
中文摘要:
      介绍7.50-16 8PR林业斜交轮胎的设计。结构设计:外直径806mm,断面宽194mm,行驶面宽度180mm,行驶面弧度高8mm,胎圈着合直径405mm,胎圈着合宽度152mm,断面水平轴位置(H1/H2)0.798mm,采用加深块状花纹设计,花纹深度16.5mm,花纹周节数26,花纹饱和度72%。施工设计:胎面采用冷喂料挤出机挤出,胎体采用4层1400dtex/3锦纶6浸胶帘布;采用胶囊反包成型机成型,液压胶囊硫化机硫化。成品轮胎性能试验结果表明,轮胎充气外缘尺寸和相关性能符合相应设计要求。
英文摘要:
      The design on 7.50-16 8PR forestry tire was described.In structure design,the following parameters were taken:overall diameter 806mm,cross-sectional width 194mm,width of running surface 180mm,arc height of running surface 8mm,bead diameter at rim seat 405mm, bead width at rim seat 152mm,maximum width position of cross-section (H1/H2)0.798,design of extra deep block pattern ,pattern depth 16.5mm,number of pattern pitches 26,and block/total ratio 72%.In construction design,the following processes were taken: The tread adopts the cold feed extruder extrusion, the carcass ply of 4 layers of 1400 dtex / 3 nylon 6 cord was used. Using bag anti - bag forming machine, hydraulic capsule curing press cure. It was confirmed by the tests of the finished tire test that,the inflated peripheral dimension and corresponding performance met the requirements of the design.
View Full Text   View/Add Comment  Download reader
Close