文章摘要
本文二维码信息
二维码(扫一下试试看!)
高转化率乳聚丁苯橡胶1502性能评价
Performance Evaluation on Emulsion Styrene butadiene Rubber 1502 with High Monomer Conversion
  
DOI:
中文关键词: 乳聚丁苯橡胶;转化率;性能
英文关键词: emulsion styrene-butadiene rubber;conversion rate;performance
基金项目:
中图分类号:TQ333.1;TQ330.7
Author NameAffiliation
ZHANG Xin-jun Beijing Research and Design Institute of Rubber Industry 
YAN Jin-jun Beijing Research and Design Institute of Rubber Industry 
ZENG Ji Beijing Research and Design Institute of Rubber Industry 
MA Wei-de Beijing Research and Design Institute of Rubber Industry 
ZHOU Zhi-feng Beijing Research and Design Institute of Rubber Industry 
LI Hua-ting Beijing Research and Design Institute of Rubber Industry 
Hits: 763
Download times: 134
中文摘要:
      试验评价单体转化率分别为76%和70%的ESBR(乳聚丁苯橡胶)1502(分别以HSBR和LSBR表示)的性能。结果表明:与LSBR相比,HSBR生胶的相对分子质量较小、相对分子质量分布宽度较大、结合苯乙烯含量稍高,门尼粘度、灰分、挥发分和凝胶含量均符合相应国家标准要求;混炼胶的硫化速度稍快,加工性能较好;硫化胶的邵尔A型硬度相当,定伸应力较高,抗湿滑性能稍好,但耐磨性能稍差。
英文摘要:
      The performance of two kinds of ESBR1502 with different monomer conversion ratio,i.e.76% (HSBR) and 70% (LSBR),was experimentally evaluated.The results showed that,compared with LSBR,HSBR had lower molecular weight,wider molecular weight distribution and higher content of bound styrene.The Mooney viscosity,ash content,volatile content and gel content of HSBR met the requirement of national standards.HSBR compound had faster curing rate and better processability than LSBR.Compared with LSBR vulcanizate,the Shore A hardness of HSBR vulcanizate was similar,the modulus was higher,the wet skid resistance was better,but the wear resistance was a little lower.
View Full Text   View/Add Comment  Download reader
Close