|
二维码(扫一下试试看!) |
轮胎制备用聚乙烯隔离膜的研制 |
Development of Polyethylene Isolation Film for Tire Production |
|
DOI: |
中文关键词: 聚乙烯隔离膜;透光率;粘度 |
英文关键词: polyethylene isolation film;light transmittance;viscosity |
基金项目: |
中图分类号:TQ325.1+ 2 |
Author Name | Affiliation | CHU Guo-jiang | Sichuan Haida Rubber Group Co.,Ltd |
|
Hits: 730 |
Download times: 27 |
中文摘要: |
采用三层共挤吹塑工艺研制轮胎制备用聚乙烯(PE)隔离膜。结果表明:当表层高密度聚乙烯与低密度聚乙烯用量比为1∶1,芯层线形低密度聚乙烯、回收造粒料、隔离剂K用量比为100∶40∶2.5,并在各层中均添加3份遮光及抗紫外线母料,吹胀比为1.45~1.55时,PE隔离膜的透光率较小,对轮胎半成品胶片的隔离和保鲜效果较好。 |
英文摘要: |
The polyethylene (PE) isolation film used in tire production was developed by using three-layer blown film extrusion process.The results showed that, when the ratio of high density polyethylene and low density polyethylene in the surface layer was 1∶1,the ratio of low density polyethylene,recycled granulated materials and agent K in the core layer was 100∶40∶2.5, the addition level of opaque and anti ultraviolet masterbatch in each layer was 3 phr, and the blow-up ratio was 1.45~1.55,the produced PE film had low light transmittance and provided good isolation and preservation effect for semi-finished products of tire. |
View Full Text
View/Add Comment Download reader |
Close |