|
二维码（扫一下试试看！） |
| 新型半钢子午线轮胎一次法成型机自动胎面裁断系统 |
| New automatic tread cutting system for one-stage semi-steel radial tire building machine |
| |
| DOI： |
| 中文关键词: 半钢子午线轮胎；成型机；胎面；裁断系统 |
| 英文关键词: semi-steel radial tire;building machine;tread;cutting system |
| 基金项目: |
| 中图分类号:TQ330.4+6；U463.341+.6 |
| Author Name | Affiliation | | JIANG Wei | Qingdao University of Science and Technology | | TANG Yue | Qingdao University of Science and Technology | | YU Yanbin | Qingdao University of Science and Technology |
|
| Hits: 1025 |
| Download times: 5 |
| 中文摘要: |
| 介绍青岛科技大学与青岛高校软控股份有限公司合作开发的新型半钢子午线轮胎一次法成型机自动胎面裁断系统。该系统由定长装置、裁断装置、压紧装置、裁刀位置检测装置和快速输送带组成。设计采用裁切角度可调(25～30°)的新式刀片(裁刀材质选用晶须增强氧化铝复合材料)；单向切割，使胎面切口方向一致；使用硅胶电加热板加热刀片，铂电阻温度传感器实时监测刀片温度，可使裁断平滑迅速，切口形状稳定，有利于接头，可提高半成品质量。 |
| 英文摘要: |
| A new type of automatic tread cutting system for one-stage semi-steel radial tire building machine was introduced.The system was composed by length measuring device,cutting device,pressing device,blade position detection device and transporting belt.A new designed blade with controllable angle (25～30°) made of whisker-reinforced aluminum oxide composite material was employed.Single direction cutting method was used to trim in a single direction.With silica-gel electric heating plate to heat the blade and platinum resistance thermo-sensor to monitor the blade temperature,the cutting procedure became rapid and smooth with stable trim shape,which should be helpful to connecting procedure and improving products quality. |
|
View Full Text
View/Add Comment Download reader |
| Close |
