文章摘要
岳爽,陈银川,王小刚,武洋.全钢载重子午线轮胎缺胶的原因分析及解决措施[J].轮胎工业,2021,(2):0115-0118 本文二维码信息
二维码(扫一下试试看!)
全钢载重子午线轮胎缺胶的原因分析及解决措施
Root Causes Analysis on Rubber Lack of Truck and Bus Radial Tire and Corrective Actions
投稿时间:2020-04-27  修订日期:2020-04-27
DOI:10.12135/j.issn.1006-8171.2021.02.0115
中文关键词: 全钢载重子午线轮胎  胎坯  胎侧  胎肩  缺胶  模具  排气设计
英文关键词: truck and bus radial tire  green tire  sidewall  shoulder  rubber lack  mold  exhaust design
基金项目:
中图分类号:
作者单位E-mail
岳爽 风神轮胎股份有限公司 yueshuang-1989@163.com 
陈银川 风神轮胎股份有限公司  
王小刚 风神轮胎股份有限公司  
武洋 风神轮胎股份有限公司  
摘要点击次数: 68
全文下载次数: 15
中文摘要:
      分析全钢载重子午线轮胎缺胶的原因,并提出相应的解决措施。采取提升胎坯外观质量,控制胶料粘性,优化胎侧和三角胶等半成品的结构设计和材料分布,优化模具排气设计,选择合适的硫化胶囊和定型参数以及规范工艺操作和定期检修模具和设备等措施,有效解决了轮胎生产过程中胎侧和胎肩缺胶等问题,提高了成品轮胎胎外观一次合格率,降低了生产成本。
英文摘要:
      The causes of rubber lack of truck and bus radial tire were analyzed,and the corrective actions were put forward.By improving the appearance quality of the green tire,controlling the stickiness of the compound,optimizing the structure design and material distribution of the semi-finished products such as sidewall and appex,optimizing the exhaust design of the mold,selecting the appropriate curing capsule and setting parameters,standardizing process operation and regularly maintained the mold and equipment,etc.,the problems such as rubber lack on the sidewall and shoulder of the tire during the production process were effectively solved,the first pass rate of finished tire appearance was improved,and the production cost was reduced.
Author NameAffiliationE-mail
yueshuang Aeolus Tyre Co.,Ltd. yueshuang-1989@163.com 
CHEN Yinchuan Aeolus Tyre Co.,Ltd.  
Wang Xiaogang Aeolus Tyre Co.,Ltd.  
Wu yang Aeolus Tyre Co.,Ltd.  
查看全文   查看/发表评论  下载PDF阅读器
关闭