| 倪海超,陈建军,薛彬彬,李培生,迟宏林.再生裂解炭黑EN660在半钢子午线轮胎过渡层中的应用[J].轮胎工业,2025,(2):0094-0097 |
二维码（扫一下试试看！） |
| 再生裂解炭黑EN660在半钢子午线轮胎过渡层中的应用 |
| Application of Recycled Pyrolysis Carbon Black EN660 in Transition Layer of Steel-belted Radial Tire |
| 投稿时间：2024-05-21 修订日期：2024-05-21 |
| DOI： |
| 中文关键词: 再生裂解炭黑 半钢子午线轮胎 过渡层 生产成本 |
| 英文关键词: recycled pyrolysis carbon black steel-belted radial tire transition layer production cost |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 315 |
| 全文下载次数: 263 |
| 中文摘要: |
| 研究再生裂解炭黑EN660在半钢子午线轮胎过渡层中的应用。结果表明：在过渡层配方中采用30份再生裂解炭黑EN660替代25份炭黑N660，并对防老剂RD用量进行调整，胶料的门尼粘度略高，硫化速度加快；硫化胶的密度和拉断伸长率增大，其他物理性能相当；成品轮胎的高速性能和耐久性能均达到国家标准要求，且生产成本降低。 |
| 英文摘要: |
| The application of recycled pyrolysis carbon black EN660 in the transition layer of steel-belted radial tire was studied.The results showed that using 30 phr recycled pyrolysis carbon black EN660 instead of 25 phr carbon black N660 in the transition layer formulation，and adjusting the dosage of antioxidant RD，the Mooney viscosity of the compound was slightly higher，and the vulcanization rate was faster.The density and elongation at break of the vulcanizate increased，while the other physical properties were equivalent.The high-speed performance and durability of the finished tire met the requirements of national standards and the production cost was reduced. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
