| 王 毅,王雪艳,张晓梅.35×12.50R20LT 121Q 10PR高通过性轻型载重子午线轮胎的开发[J].轮胎工业,2025,(4):0210-0213 |
二维码（扫一下试试看！） |
| 35×12.50R20LT 121Q 10PR高通过性轻型载重子午线轮胎的开发 |
| Design on 35×12.50R20LT 121Q 10PR High flotation Light Truck and Bus Radial Tire |
| 投稿时间：2023-12-29 修订日期：2023-12-29 |
| DOI： |
| 中文关键词: 轻型载重子午线轮胎 结构设计 施工设计 成品轮胎性能 |
| 英文关键词: light truck and bus radial tire structure design construction design finished tire performance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 116 |
| 全文下载次数: 72 |
| 中文摘要: |
| 介绍35×12.50R20LT 121Q 10PR高通过性轻型载重子午线轮胎的设计。结构设计：外直径 885 mm，断面宽 322 mm，行驶面宽度 280 mm，行驶面弧度高 14.8 mm，胎圈着合直径 512.5 mm，胎圈着合宽度 280 mm，断面水平轴位置（H1/H2） 0.96，胎面花纹为对称形式，花纹深度 16.4 mm，花纹饱和度 50%，花纹周节数 40。施工设计：胎面由胎面胶和基部胶组成，带束层采用2层2＋7×0.28钢丝帘线，胎体采用3层1670dtex/2聚酯帘布，采用二次法成型机成型、液压硫化机硫化。成品性能试验结果表明，成品轮胎的充气外缘尺寸、强度性能、脱圈阻力、耐久性能和高速性能均符合相关设计和企业标准要求。 |
| 英文摘要: |
| The design on 35×12.50R20LT 121Q 10PR high flotation light truck and bus radial tire was introduced.In the structure design，the following parameters were taken：overall diameter 885 mm，cross-section width 322 mm，width of running surface 280 mm，arc height of running surface 14.8 mm，bead diameter at rim seat 512.5 mm，bead width at rim seat 280 mm，maximum width position of cross-section（H1/H2） 0.96，using symmetric pattern for tread，pattern depth 16.4 mm，block/total ratio 50%，and number of pattern pitches 40.In the construction design，the following parameters were taken：the tread was composed of tread compound and base compound，two-layer 2＋7×0. 28 steel cord，three-layer 1670dtex/2 polyester ply for carcass，using two stage building machine to build tire，and hydraulic curing press to cure tire.The finished tire performance test results showed that the inflated peripheral dimension，strength，durability and high-speed performance all met the requirements of corresponding design and enterprise standards. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
